CMRV090 IEC90 i=30 Worm gearbox

Category: Tag:

Description

Product information “JS- CMRV090 IEC90 i=30 Worm gearbox”

Worm gearbox with IEC flange to the motor side,

Ratio (i)= 40, Hollow shaft= 35mm, IEC-Input Hollow shaft= 24 x 50mm,

IEC-Input flange B14 = 140 x 95 x 115mm, suitable for motors of the size 90 B14

IEC-Input flange B5 = 200 x 130 x 165mm, suitable for motors of the size 90 B5,

Weight= 13.0 kg, Color= RAL 5010 (gentian blue). The gearbox can rotate in both

Motors with worm gears are available on very short notice

Our teams are specialized in solving issues in the area of professional drive technology which includes frequency converters, electric motors, and motors that are geared.

Size of the Motor with Gears and Motor Power

In our online shop for drive technology, there is a selection of frame sizes: NMRV 30 40 50, 63 75, 80 100, 125, RPM (i.e. the number of revolutions per minute, or min-1) The power range is 0.12kW, 0.25kW, 0.37kW, 0.55kW, 0.75kW, 1.1kW, 1.5kW, 2.2kW, 3.0kW, 4kW, 5.5kW, 7.5kW.

The Diameter of the Shaft as Well as the Torque

The aluminum worm gearboxes can be found with the hollow shafts listed below that measure 14 mm, 18 millimeters, 20 millimeters 25 mm, 28 mm 30 35 mm, 40 mm, and 45mm. The torque output is primarily based on the motor’s efficiency, power, and speed of output. In light of these factors, we provide an assortment of worm gearboxes that ranges from 10 to 2000 Nm. The torque is determined using the following equation: where M refers to the force in Nm and P is the motor’s power in kW and n represents the rate in minutes 9550: M = P + the number.

Worm Gear Box Function

A worm Gear Reducer also referred to as a worm gear reducer comprises a shaft by one pitch or two, which is a worm, and a helical gear pinion which is the worm gear meshes together with the worm. Two axes make up an angle of 90 degrees. This kind of gearbox is specifically designed for applications that require reduced gears with a single step. Worm-geared motors that have left-hand and right-hand pitches. These motors operate simultaneously in two directions. Mounting is highly flexible and can include feet, flanges, and other centering solutions that include torque supports. When the effectiveness is lower than 50 percent, then self-locking will occur.

Worm Gearbox Installation

A motor terminal box is able to be positioned onto the motor using 90-degree steps, as needed. JS motors that are geared can be mounted almost everywhere needed. The locations are referred to as M1 or M2, and M3, M4, and M6.

Worm Gearboxes, Their Benefits, And the Advantages to Them

Based on the ease of exchangeability as well as the low noise operation Gear motors (IEC Flanges) Customers benefit from increased flexibility in the choices for construction, reduced costs as well as shorter lead times, and less hassle in installations and repairs.

Worm Gearbox Combination

Worm gearboxes are offered in a variety of speeds, ranging between 2 and 600 RPM (revolutions each minute). In most cases, motor/worm gearbox combinations must be designed to meet the specific needs of the customer. With our decades of experience and our own assembly, we’re the ideal partner for businesses that require outside expertise to resolve a variety of issues. This includes the worm gearboxes that are equipped with brake motors, specially-designed shafts, and rotisserie rotisseries with gearboxes. Motors powered by electricity, worm-geared motors that have a specific power supply (500V), or explosion-proof designs.