China CZPTr 300m Truck Mounted Water Properly Drilling Rig for sale
Major characteristics:
C350ZY truck mounted drilling rig is designed by our engineers it adopts truck mounted and is a rotary drilling rig.
The truck chassis adopts the 6X4 particular crane chassis of manufacturer SINOTRUK, the principal transmit, transmission electrical power, gearbox, sets of windlass, mud pump, sewage pump,mast are set up on the chassis.
This rig is a rotary drilling rig with directional circulation, which is equipped with BW850/2A mud pump, It adopts the slurry as the washing fluid, it can drill on clay, sand and rock if it is outfitted with a good drilling bit.
The power of drilling rig will come from the truck engine, the rig sets up distribute implement and hydraulic technique.
We can established up the spare electric motor and clutch implement according to client’s requirement, so that the rig can operate with diesel motor or electrical engine.
We can set up a generator (15kw) , so that it is ease to illuminate or work at evening.
The incorporating force apply is hydraulic, so it has a substantial effectiveness when the rig drill on mud rock and weathering development by way of using the adding force put into action.
The grasp driving of rig is mechanical, the four jacks and mast are hydraulic operated. Distribute box, sewage pump, grasp driving clutch system are air operated.
The appearance of rig is quite, it has a substantial efficiency because of having a larger torque of the turntable, it is primarily employed for drinking water properly, building, national defense creating foundation, geological exploration, geothermic well and other foundation doing work, it is popular with domestic and foreign consumers.
CZPT Parameter
| CZPT parameter | |||
| Drilling depth(M) | 300 | ||
| Drilling diameter(mm) | 500 | ||
| Velocity of turntable(r/min) | 21.23663.2100.615520.2(reverse) | ||
| Torque of turntable(KN.m) | 1810.663.eighty two.518.nine(reverse) | ||
| Single rope lifting ability of windlass(KN) | thirty | ||
| The capability of primary windlass(KN) | 180 | ||
| Single rope lifting potential of hydraulic windlass(KN) | 40 | ||
| The potential of hydraulic windlass(KN) | a hundred and sixty | ||
| The lifting ability of hook(KN) | one hundred eighty | ||
| Bearing potential of mast (KN) | 180 | ||
| The peak of mast (mm) | 11500 | ||
| Bearing capability (t) | twenty five | ||
| Pipe | Kelly (mm) | 108×108×7500 | |
| Assistant pipe (mm) | Ф89×10×5500 | ||
| CZPT pump | Design | CB-HP50/32Z | |
| Pump shipping (ml/r) | 50/32 | ||
| Rated velocity (r/min) | 2000 | ||
| Rated stress(MPa) | 20 | ||
| Diameter of cylinder (mm) | one hundred fifty | ||
| Stroke of piston (mm) | a hundred and eighty | ||
| Theory of stream (L / min) | 600 850 | ||
| Rated pressure (Mpa) | 3 two | ||
| BW850/2A plunger pump | Pounding instances (min-one) | 58 82 | |
| Diameter of suction tube (mm) | 127 | ||
| Diameter of drain pipe (mm) | sixty four | ||
| Enter speed (r / min) | 470 | ||
| Enter electrical power (kw) | forty | ||
| Overall proportions (mm) | 2000*1030*1400 | ||
| Excess weight (t) | one.five | ||
| Truck chassis | Design | TAZ5183TZJ | |
| CZPT form | 6×4 | ||
| Motor |
Design | CA6DE3-20E3(CZPTe III emission CZPT) | |
| Rated electrical power(KW) | 147 | ||
| Velocity (r/min) | 2300 | ||
| Size (L*W*H)(mm) | 11110×2490×2500 | ||
| CZPTtric generator | Design | MF | |
| Rated electricity (kw) | fifteen | ||
| Rated voltage(v) | 400 | ||
| Rated recent(A) | 27 | ||
| Velocity (r/min) | 1500 | ||
| Frequency(Hz) | fifty | ||
| CZPT degree | IP21 | ||
| Insulation Course | H | ||
| The greatest doing work equipment (or speed) | 5th equipment(one thousand-1400r/min) | ||
| The optimum pace(Km/h) | seventy five | ||
| Weight (kg) | 19340 | ||
| Transportation dimension(L*W*H)(mm) | 12160*2490*3440 | ||
| Operating measurement(L*W*H)(mm) | 11110*2490*13110 | ||
Connected CZPT
Company Profile
Glorytek CZPT (ZheJiang ) Co., Ltd. is an built-in company specialized in producing and exporting prime top quality drilling gear and drilling areas for much more than 20 many years. We are supported and assisted by extremely knowledgeable R&D staff and enginners that allow us to full all the assigned projects successfully as for each clients’ demands.
Our manufacturing facility handles an spot of 250,000 square meters, development region is about 150,000 square meters, getting machining equipment, CNC processing centre, friction welding device, screening equipments etc. in excess of two hundred sets and much more than 600 staff.
Our products have been exported far more than 60 nations, which includes Australia, Russia, Soutn Africa, Zimbabwe, Malaysia, Indonesia, South Korea, France, Sweden, United states of america, Canada, Haiti etc.
FAQ
Q: How can we pick a suited drinking water well drill rig?
A: We usually advise a appropriate model in accordance to drilling depth, drilling hole dia. and layer problem on website.
Q: Are you a manufacturing unit or a trading organization ?
A: We are an integrated company specialised in manufacturing and exporting.
Q: What is your payment phrases?
A: We can take T/T,L/C.
Q:.What is your MOQ? How prolonged is the shipping and delivery time?
A: Our MOQ is one sets. Usually for drill rig, the supply time is about twenty five-30 times after obtaining payment, the drilling resources would be about fifteen days.
Q:. How prolonged is the guarantee?
A: The guarantee period for mainframe is one particular year (excluding the fast wear areas).
Q: Can we print my Symbol on the goods?
A: Yes, we can. We assist OEM .
